Plumbing Pipes – Identifying Different Types
Download Plumbing Pipes – Identifying Different Types
Even More Safety Tips
The most common pipes used today are copper, PVC or ABS. However, when dealing with older homes, you might encounter a number of other piping materials. For example, homes built before 1960 used galvanized steel or cast iron DWV (drain/waste/vent) pipe systems. Here’s a quick look at types of pipes commonly used in homes: Cast Iron: Commonly used before 1960 for the vertical drain, vent stacks and sometimes the horizontal drain lines. Cast iron is durable, but can rust over time. Call a professional plumber to replace rusted sections with plastic (PVC or ABS) and the correct transition fittings.
Plastic: Plastic pipe comes as either ABS (acrylonitrile-butadiene-styrene) or PVC (polyvinyl-chloride). Most homes since mid-1970 have plastic pipes and fittings because it’s inexpensive and easy to use. Simply glue the joints using a primer and liquid cement.ABS: This black pipe was the first plastic pipe to be used in residential plumbing. Today, many areas don’t allow ABS in new construction because joints can come loose. Check with your local plumbing inspector if you want to use ABS. PVC: This white or cream-colored pipe is the most commonly used pipe for drain lines. It’s strong, untouchable by chemicals, and seems to last forever! The rating and diameter is stamped right on the pipe.
- Schedule 40 PVC is strong enough for residential drain lines, but check with your plumbing inspector first. CPVC (chlorinated polyvinyl chloride) pipe has the strength of PVC but is heat-resistant, which makes it acceptable in many regions for use on interior supply lines.
- Schedule 80 PVC is sometimes used for cold-water supply lines, but it isn’t allowed in some regions because it isn’t suitable for hot water.
- Rigid copper, which comes in three thicknesses. Type M is the thinnest but is strong enough for most homes. Types L and Type K are thicker and used in outdoor and drain applications. To cut rigid copper, you’ll need a wheel cutter, tube cutter, or a hacksaw. Pipes are usually connected with soldered (sweat) fittings and compression fittings can connect the pipe to shut-off valves.
- Flexible copper, which is often used for dishwashers, refrigerator icemakers, and other appliances that need a water supply. It’s easy to bend, but if it kinks, you must cut the piece off and replace it. Sections of flexible copper pipe are joined using either soldered or compression fittings